34Synchronize from a serverTo use a remote internet server, subscribe to a synchronization service. For more informationand the settings required for this service, contact your service provider. You may receivethe settings as a configuration message. See “Configuration settings service‚" p. 10 and“Configuration‚" p. 36.To start the synchronization from your phone, select Menu > Settings > Connectivity > Datatransfer > Server sync. Depending on the settings, select Initializing sync or Initializing copy.Synchronizing for the first time or after an interrupted synchronization may take up to30 minutes to complete.USB data cableYou can use the USB data cable to transfer data between the phone and a compatible PC.You can also use the USB data cable with Nokia PC Suite.To activate the phone for data transfer or image printing, connect the data cable. ConfirmUSB data cable connected. Select mode. and select from the following:Nokia mode — to use the phone to interact with applications on a PC that has Nokia PC SuitePrinting & Media — to connect the phone to a PC to synchronize it with Windows MediaPlayer (music, video)Data storage — to connect to a PC that does not have Nokia software and use the phone as adata storageTo change the USB mode, select Menu > Settings > Connectivity > USB data cable >Nokia mode, Printing & Media, or Data storage.■ CallSelect Menu > Settings > Call and from the following:Call forwarding — to forward your incoming calls (network service). You may not be ableto forward your calls if some call restriction functions are active. See Call restriction in“Security‚" p. 36.Anykey answer — to answer an incoming call by briefly pressing any key, except the powerkey, the camera key, the left and right selection keys, or end keyAutomatic redial — to make a maximum of 10 attempts to connect the call after anunsuccessful call attemptVoice clarity — to enhance speech intelligibility especially in noisy environments, select Active.1-touch dialing — to dial the names and phone numbers assigned to the speed-dialing keys2-9 by pressing and holding the corresponding number key