M e s s a g i n g36Msg. center in use — to select the message center in useE-mail msg. centers > Add center — to set the phone numbers and name of thee-mail center for sending SMS e-mails.E-mail center in use — to select the SMS e-mail message center in useMessage validity — to select the length of time for which the network attemptsto deliver your messageMessages sent via — to select the format of the messages to be sent: Text, Page,or Fax (network service)Use packet data > Yes — to set GPRS as the preferred SMS bearerCharacter support > Full — to select all characters in the messages to be sent asviewed. If you select Reduced, characters with accents and other marks may beconverted to other characters.Rep. via same center > Yes — to allow the recipient of your message to send you areply using your message center (network service)Multimedia messagesThe message settings affect the sending, receiving, and viewing of multimediamessages. You may receive the configuration settings for multimedia messagingas a configuration message. See "Configuration settings service," p. 10. You canalso enter the settings manually. See "Configuration," p. 50.Select Menu > Messaging > Message settings > Multimedia messages and fromthe following options:Delivery reports > On — to ask the network to send delivery reports about yourmessages (network service)Img. size (MMS plus) — to set the image size in multimedia plus messages.Image size (MMS) — to set the image size in multimedia messages.Default slide timing — to define the default time between slides inmultimedia messagesAllow MMS receptn. > Yes or No — to receive or block the multimedia message.If you select In home network, you cannot receive multimedia messages whenoutside your home network. The default setting of the multimedia messageservice is generally In home network. The availability of this menu depends onyour phone.Incoming MMS msgs. — to allow the reception of multimedia messagesautomatically, manually after being prompted, or to decline the reception.This setting is not shown if Allow MMS receptn. is set to No.