S e t t i n g s47To define the settings for connections from your PC, select Menu > Settings >Connectivity > Packet data > Packet data settings > Active access point, andactivate the access point you want to use. Select Edit active access pt. > Packetdata acc. pt., enter a name to change the access point settings, and select OK.Select Packet data acc. pt., enter the access point name (APN) to establish aconnection to an network, and select OK.You can also set the EGPRS dial-up service settings (access point name) on your PCusing the Nokia Modem Options software. See "Nokia PC Suite," p. 81. If you haveset the settings both on your PC and on your phone, the PC settings are used.Data transferSynchronize your calendar, contacts data, and notes with another compatibledevice (for example, a mobile phone), a compatible PC, or a remote Internetserver (network service).Your phone allows data transfer with a compatible PC or another compatibledevice when using the phone without a SIM card.Transfer contact listTo copy or synchronize data from your phone, the name of the device and thesettings must be in the list of transfer contacts. If you receive data from anotherdevice (for example, a compatible mobile phone), the corresponding transfercontact is automatically added to the list, using the contact data from the otherdevice. Server sync and PC synchronization are the original items in the list.To add a new transfer contact to the list (for example, a mobile phone), selectMenu > Settings > Connectivity > Data transfer > Options > Add transfercontact > Phone synchronization or Phone copy, and enter the settings accordingto the transfer type.To edit the copy and synchronize settings, select a contact from the transfercontact list and Options > Edit.To delete a transfer contact, select it from the transfer contact list andOptions > Delete.Data transfer with a compatible deviceFor synchronization use Bluetooth wireless technology or a cable connection.The other device must be activated for receiving data.To start data transfer, select Menu > Settings > Connectivity > Data transfer andthe transfer contact from the list other than Server sync or PC synchronization.According to the settings, the selected data is copied or synchronized.
