26 Copyright © 2008 Nokia. All rights reserved.C a l l f u n c t i o n sVideo sharing settingsA person-to-person connection is also known as a sessioninitiation protocol (SIP) connection. Before you can usevideo sharing, ask your service provider for the configuredSIP profile to be used in your device.Select > Settings > Phone sett. > Connection > Videosharing and from the following:Video sharing — to select whether the video sharing isenabledSIP profile — to select a SIP profileVideo saving — to set whether the live videos areautomatically savedPreferred saving memory — to select whether to save thevideos to the device memory or to a memory cardCapability alert tone — to set an alert tone to sound whenvideo sharing is available during a callIf you know a recipient’s SIP address, you can save it toContacts. Select > Contacts, the contact, andOptions > Edit > Options > Add detail > SIP or Sharevideo. Enter the SIP address (username@domainname).You can use an IP address instead of a domain name.Share live video or video clip1 To share live video you are recording with the devicecamera, select Options > Share video > Live videoduring a voice call. To share a saved video clip, selectVideo clip and the clip you want to share.2 The device sends the invitation to the SIP address yousaved to Contacts.If necessary, to send the invitation, select the SIPaddress of the recipient; or enter a SIP address, andselect OK.3 Sharing begins automatically when the recipientaccepts the invitation, and the loudspeaker is active.Use the toolbar buttons to control the video sharing.4 To end the sharing session, select Stop. To end the voicecall, press the end key.Accept an invitationYour device rings when you receive an invitation. Theinvitation shows the sender’s name or SIP address. SelectYes to begin the sharing session. To decline the invitationand to return to the voice call, select No.LogTo view missed, received, or dialled calls; text messages;packet data connections; and fax and data calls registeredby the device, select > Log.In the standby mode, you can use the call key as a shortcutto Dialled numbers in the Recent calls log (networkservice).