1. To assign a phone number to one of the number keys,select Speed dialling.2. Scroll to the key to which you want to assign the phonenumber, and select Options > Assign.1 is reserved for the voice mailbox.To call in the home screen, select to open the dialler, selectthe assigned key number, and press the call key.To call in the home screen when speed dialling is active, selectto open the dialler, and tap and hold the assigned keynumber.Call waitingYou can answer a call when you have another call in progress.To activate call waiting (network service), select Menu >Settings and Calling > Call > Call waiting.1. To answer the waiting call, press the call key. The first callis put on hold.2. To switch between the two calls, select Options >Swap.3. To connect an incoming call or a call on hold with an activecall, and to disconnect yourself from the calls, selectOptions > Transfer.4. To end the active call, press the end key.5. To end both calls, select Options > End all calls.Voice diallingYour device supports enhanced voice commands. Enhancedvoice commands are not dependent on the speaker’s voice,so you do not need to record voice tags in advance. The devicecreates a voice tag for the entries in the contacts andcompares the spoken voice tag with it. The voice recognitionin the device adapts to the main user’s voice to recognise thevoice commands better.The voice tag for a contact is the name that is saved for thecontact. To listen to the synthesised voice tag, select a contactand Options > Voice tag details. Scroll to a contact detail,and select Options > Play voice tag.Make a call with a voice tagNote: Using voice tags may be difficult in a noisyenvironment or during an emergency, so you should not relysolely upon voice dialling in all circumstances.When you use voice dialling, the loudspeaker is in use. Holdthe device at a short distance away when you say the voicetag.1. To start voice dialling, in the home screen, press and holdthe call key. If a compatible headset with the headset keyis attached, press and hold the headset key to start voicedialling.2. A short tone sounds, and Speak now is displayed. Sayclearly the name that is saved for the contact.3. The device plays a synthesised voice tag for therecognised contact in the selected device language, andMake calls© 2008 Nokia. All rights reserved. 31