M e s s a g e s ( M e n u 1 )24Note: Voice mail servicesvary by service provider. Thefollowing instructions areexamples of commonoperations. Please check withyour service provider forspecific instructions for usingyour voice mail service.Write down voice mailboxnumber and process1. Write down your voice mailboxnumber.2. Call and check your voice mail asyou normally would.3. Write down your interaction withthe recorded prompts step-by-step. Keep in mind that eachvoice mail service may vary.However, it should looksomething like this:Dial 2145551212, pause 5seconds, press 1, pause 2seconds, press 1234, press #.Be precise; you will need thisinformation in Setup voice mail withdialling codes, 24.Insert dialling codesPress * repeatedly to cycle throughdialling codes. Once the desired codeappears in the display, pause brieflyand the code is inserted into thedialling string.The following dialling codes areavailable:*—Bypasses a set of instructions.+—International access.p—Pauses for 2.5 seconds beforesending any numbers that follow.w—Waits for you to press the Talkkey before sending the numbers orcodes that follow.Setup voice mail with diallingcodes1. In the standby mode, selectContacts > Speed dials.2. Scroll to an (empty) speeddialling slot and press Assign.3. Enter your voice mailbox number,including the area code.4. Refer to dialling codes and enterany codes as necessary using theinformation that you wrote downfrom Setup voice mail withdialling codes, 24.For example, if you pause for 5seconds after connecting to voicemail, enter p twice after the voicemailbox number, for example,2145551212pp.5. Enter any remaining pauses orother information that allowsyou to listen to your messages,and press OK.6. Enter a name (such as VoiceMail), and press OK.To dial and listen to your voice mail,press and hold the assigned speeddialling key in the standby mode.