Nokia 6080 User Manual

Also see for 6080 - Cell Phone 4.3 MB: Specification sheet User guide User guide

Contents

Nokia 6080 User Manual Manual pdf 37 page image

36Select When needed to set the packet data connection to be established when an applicationneeds it. The connection will be closed when the application is ended.Select Always online to set the phone to automatically connect to an packet data networkwhen it is switched on.indicates a packet data connection.Modem settingsTo connect the phone, use an IR or a data cable (CA-42) connection to a compatible PC, anduse the phone as a modem to enable packet data connectivity from the PC.To define the settings for connections from the PC, select Menu > Settings > Connectivity >Packet data > Packet data settings > Active access point, activate the access point you wantto use, and select Edit active access point. Select Alias for access point, and enter a nicknamefor the currently selected access point. Select Packet data access point, and enter the accesspoint name (APN) to establish a connection to an EGPRS network.To set the dial-up service settings (access point name, APN) on your PC using the Nokia ModemOptions software. See "Nokia PC Suite," p. 51. If you have set the settings both on the PC andon your phone, the PC settings are used.■ EnhancementsThis menu is displayed only if the phone is or has been connected to a compatiblemobile enhancement.Select Menu > Settings > Enhancements. You can select an enhancement menu if thecorresponding enhancement is, or has been, connected to the phone. Depending on theenhancement, select from the following options:Default profile — to select the profile that you want to be automatically activated when youconnect to the selected enhancementAutomatic answer — to set the phone to answer an incoming call automatically after 5 seconds.If Incoming call alert is set to Beep once or Off, automatic answer is off.Lights — to set the lights permanently On. Select Automatic to set the lights on for 15 secondsafter a keypress.TTY/TDD > Use TTY > Yes — to use the TTY settings instead of headset or loopset settings■ ConfigurationYou can configure your phone with settings that are required for certain services to functioncorrectly. The services are browser, multimedia messaging, remote Internet server synchronization,presence, and e-mail application. Get the settings from your SIM card, from a service provider asa configuration message, or enter your personal settings manually. You can store configurationsettings for up to 20 service providers in the phone and manage them within this menu.To save the configuration settings received by a configuration message from a serviceprovider, see "Configuration settings service," p. 10.