S e t t i n g s68USB data cableYou can use the USB data cable to transfer data between the phone and a compatiblePC or a printer supporting PictBridge. You can also use the USB data cable withNokia PC Suite. A USB data cable can be purchased as an accessory.To activate the phone for data transfer or image printing, connect the data cable;when the phone displays USB data cable connected. Select mode., select OK.Select from the following modes:Default mode — to use the cable for PC SuitePrinting — to print images directly from the phone using a compatible printerTo change the USB mode, select Menu > Settings > Connectivity > USB datacable > Default mode, Printing, or Data storage.■ CallSelect Menu > Settings > Call settings and from the following options:Call forwarding — to forward your incoming calls (network service). You may notbe able to forward your calls if some call restricting functions are active. See Callrestrictions in "Security," p. 70.Anykey answer > On — to answer an incoming call by briefly pressing any key exceptthe power key, the camera key, the left and right selection keys, or the end keyAutomatic redial > On — to make a maximum of 10 attempts to connect the callafter an unsuccessful call attemptSpeed dialing > On — to dial the names and phone numbers assigned to the speeddialing keys 2 to 9 by pressing and holding the corresponding number keyCall waiting > Activate — to have the network notify you of an incoming callwhile you have a call in progress (network service). See "Call waiting," p. 21.Summary after call > On — to briefly display the approximate duration and cost(network service) of the call after each callSend my caller ID > Yes — to show your phone number to the person you are calling(network service). To use the setting agreed upon with your service provider, selectSet by network.Line for outgoing calls — to select the phone line 1 or 2 for making calls if supportedby your SmartChip card (network service).6126.EN_ESv1_BIL_9249003_Cingular_UG.book Page 68 Friday, May 26, 2006 1:22 PM
