S e t t i n g s60If you use the Auto-update of date & time option while outside the digital network,you may be prompted to enter the time manually. Network time replaces the timeand date when you reenter your digital network.If your battery has been removed or has discharged outside the digital network,you may be prompted to enter the time manually (when the battery is replaced orrecharged, and you are still outside of the digital network).■ Call settingsLocation info sharingLocation info sharing is available for the Nokia 6155i device. Location infosharing is a network service. See "Network services," p. 5.If your wireless service provider supports this feature, then location info sharingallows the device to share position information over the network. For calls toemergency numbers, this position information may be used by the emergencyoperator to determine the position of the device. The functionality and accuracyof this feature are dependent on the network, satellite systems, and the agencyreceiving the information. This feature may not function in all areas or at all times.Select Menu > Settings > Call > Location info sharing and from the following:Emergency—This is the default profile. The device location information is sharedonly during an emergency call to the official emergency number programmedinto your device. The screen displays in the upper left hand corner in thestandby mode.On—The device location information is shared with the network whenever thedevice is powered on and activated. The screen displays in the upper lefthand corner in the standby mode.Location information is shared with the network during emergency calls to theofficial emergency number programmed into the device, regardless of thesetting. After making an emergency call, the device remains in the emergencymode for 5 minutes. During this time, the location information is shared with thenetwork. See "Emergency calls," p. 98.Anykey answerAnykey answer enables you to answer an incoming call. Briefly press any keyexcept the right selection or end key. Select Menu > Settings > Call > Anykeyanswer > On or Off.
