O r g a n i z e r84Lap timing—You can use the lap time function when you want to track howlong it takes to complete each cycle or lap. Select Lap to note the lap time.The clock stops, then starts immediately from zero. The lap time appearsbelow the running time. Each time you select Lap, the new measured timeappears at the beginning of the list.2. Select Stop to end the timing and display the total time or Stop > Options >Start or Reset to continue or reset timing.Lap and split timesTo save a time while the clock is running, select Stop > Save, enter a name for themeasurement, and select OK. If you do not enter a name, the total time is used asthe default title for the lap or split time.To view a saved time, select Menu > Organizer > Stopwatch > Show last time orView times.To delete a saved time from Stopwatch, select View times and the time to delete,and select Delete > Yes; or select Delete times > One by one or Delete all.Operation noteIf you press the end key and return to the standby mode, the clock continues torun in the background, and appears in the upper left corner.To return to the stopwatch screens, select Menu > Organizer > Stopwatch >Continue. To stop the clock, select Stop.OptionsYou can choose the following options when you use the stopwatch:Continue—Appears when the stopwatch is working in the background.Show last time— Appears when you have saved a split or lap time and displays thelast time saved.Split timing—Asks if you want to discontinue previous timing.Lap timing—Asks if you want to discontinue previous timing.View times—Enables you to browse the saved times.Delete times—Enables you to delete any saved times. You can delete the savedtimes one by one or all at once.
