S e t t i n g s70Connection indicator• When is shown continuously, the IR connection is activated and yourphone is ready to send or receive data using its IR port.• When blinks, your phone is trying to connect to the other device or aconnection has been lost.Data cable transferTo transfer data from your phone to a compatible PC or from a compatible PC toyour phone, use a CA-53 USB data cable. To disconnect the cable from the device,hold the connector, and remove the cable.Disconnect the USB data cable from the phone to make a call.Enable default mode connectionConnect to your PC in Default mode to transfer phone data and files betweenyour phone and PC using PC Suite.1. Connect your PC and your phone with a CA-53 USB data cable. A notificationis displayed that asks which mode you want to select.2. Select Accept > Default mode. A notification is displayed stating that aconnection is active.You can now use PC Suite to connect to your phone.Disable data storage connection1. To disable the USB data cable, double-click the green arrow on the taskbar atthe bottom of your PC screen.Unplug or Eject Hardware is displayed.2. Click on USB Device in the Hardware devices window.Stop a Hardware device is displayed.3. Highlight USB device, and click OK.The Safe to Remove Hardware pop-up window is displayed with thefollowing message “The ‘USB Device’ device can now be safelyremoved from the system."4. Click OK.■ Enhancement settingsThe enhancement settings menu is shown only if the device has been connectedto a compatible enhancement. Select Menu > Settings > Enhancements >Hearing aid, Headset, Handsfree, or Charger.
