Nokia 6185 Owner's Manual

Also see for 6185 - Cell Phone - CDMA: User guide Owner's manual User guide

Nokia 6185 Owner's Manual Manual pdf 38 page image

622. Scroll to Options, then press Select3. Press Select at Scrolling view4. Press t or s to select either Name list, Name+number,or Name only, then press OKSecurity settingsThis menu includes the following security features:4-3-1 Restrict calls - See page 57.4-3-2 Access codes - See page 17.The Access codes submenu includes Phone lock (page 53),Unlocked phone number (page 72), Change lock code(page 43), and Change security code (page 62).Security codeYour phone will prompt you for a five digit security code forcertain features. These features can be used only after thecorrect security code has been successfully entered.Note: When entering your security code, ***** will appear on the displayto keep others from viewing your code.If you make a mistake entering the code, erase the last entereddigit by pressing Clear (or press and hold Clear to delete allthe digits on your display). Then enter the correct code or pressBack to exit the current feature.If you enter an incorrect security code (Code error will appear)five times in a row, your phone won’t accept any entries forthe next five minutes.Your phone’s default security code is 12345. It’s highlyrecommended that you change this code at once, write it down,and store it in a safe place away from your phone.Changing your security code1. Press Menu 4-3-2-4 (Settings - Security settings -Access codes - Change security code)2. Enter security code and press OK3. Enter new security code at Enter new security code:,63press OK (must be five digits)4. Enter new security code again at Verify newsecurity code:, press OK5. Phone will display Security code changedNote: If you have changed your security code and don’t rememberthe new code, contact your service provider. Once you havechanged your security code, the default setting is no longer valid.Send own caller ID with next callIn most service areas, when you call someone your namewill be presented to his/her caller ID (if they subscribe).This feature allows you to block their caller ID (yournumber will not be displayed) when you call them. Thisfeature works on a per-call basis. Contact your serviceprovider for more details.Please be aware of the following:• This feature is only effective when calling to a number thatis equipped with Caller ID.• This feature is available only when supported by thewireless network, and may not function if you are roaming.Note: Before you can activate this feature, you should first storethe feature code given to you by your service provider. Otherwise,this feature may not appear in the menu or function properly.Check with your service provider to confirm if the feature code hasbeen pre-programmed for you. See “Network feature setting” onpage 47 for more details.1. Press Menu 4-4-3 (Settings - Network services -Send own caller ID with next call)2. t to Yes (to show your number) or No (to not showit) and press OK3. Enter the number you wish to call (or press Searchto retrieve the number from the phone book andpress OK), then press OK4. Your phone will attempt to call this number with thefeature code you stored in Menu 4-4-4 (see “Networkfeature setting” on page 47)