M e s s a g i n g44 FCC DRAFT ONLYWhen you connect and the prerecorded greeting begins, follow the automatedinstructions to listen to your voice messages.Automate voice mailVoice mail services vary by service provider. The following instructions areexamples of common operations. Please check with your service provider forspecific instructions for using your voice mail service.Write down number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Notethat each voice mail service may vary. Your steps may resemble the following:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, andpress *.Be precise; you will need this information in "Set up voice mail with dialingcodes," p. 44.Set up voice mail with dialing codes1. In the standby mode, select Menu > Contacts > 1-touch dialing.2. Scroll to an empty 1-touch dialing slot, and select Assign.3. Enter your voice mailbox number, including the area code.4. Refer to dialing codes, and enter any codes as necessary using theinformation that you saved from "Write down number and process," p. 44.For example, if you pause for 5 seconds after connecting to voice mail, enter ptwice after the voice mailbox number, for example, 2145551212pp. For moreinformation on dialing codes see "Insert dialing codes," p. 51.5. Enter any remaining pauses or other information that allows you to listen toyour messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialingkey in the standby mode.
