S e t t i n g s91FCC DRAFT ONLY3. The user of the other device should activate IR as well.If data transfer is not started within 2 minutes after the activation of the IR port,the connection is cancelled and must be restarted.Connection indicator• When is shown continuously, the IR connection is activated and yourphone is ready to send or receive data using its IR port.• When blinks, your phone is trying to connect to the other device or aconnection has been lost.USB data cable transferYou can transfer data from your phone to a compatible PC, or from a compatiblePC to your phone using a CA-53 USB data cable. You can connect to a PC in threeseparate modes.Important: Disconnect the USB data cable from the phone to make acall.Enable default mode connectionConnect to your PC in Default mode to transfer phone data and files betweenyour phone and PC using Nokia’s PC Suite.1. Connect your PC and your phone with a CA-53 USB data cable. A notificationappears on the display that asking which mode you want to select.2. Select OK > Default mode. A notification appears on the display stating aconnection is active.You can now use PC Suite to connect to your phone.Enable printing connectionConnect to a printer that support PictBridge in Printing mode to print picturesdirectly.1. Connect your PC and your phone with a CA-53 USB data cable. A notificationappears on the display that asking which mode you want to select.2. Select OK > Printing. A notification appears on the display stating aconnection is active.You can now directly print pictures to PictBridge printer from your phone.
