ORIf 1-touch dialing is set to On, press and hold a number key until the call begins.Further details are described in 1-touch dialing. See "Call," p. 53.Enhanced voice dialingYou can make a phone call by saying the name that is saved in the contact listof the device.Voice commands are language-dependent. Set the Recognition lang. beforeusing voice dialing. See "Phone," p. 54.Note: Using voice tags may be difficult in a noisy environment or duringan emergency, so you should not rely solely upon voice dialing in allcircumstances.1. In the standby mode, press and hold the right selection key or the volumedown key. A short tone sounds, and Speak now is displayed.2. Speak the name of the contact you want to dial clearly. If the voicerecognition is successful, a list with matches is shown. The device plays thevoice command of the first match on the list. If it is not the correct command,scroll to another entry.Using voice commands to carry out a selected device function is similar to voicedialing. See "Voice commands," p. 48.Answer or reject a callTo answer an incoming call, press the call key. To end the call, press the endkey.To reject an incoming call, press the end key. To mute the ringing tone, selectSilence.To answer a waiting call during an active call (network service), press the callkey. The first call is put on hold. To end the active call, press the end key. Youmay also activate the Call waiting function. See "Call," p. 53.C a l l f u n c t i o n s25
