• Paired devices — to search for any Bluetooth device in range. Select Newto list any Bluetooth device in range. Select a device and Pair. Enter an agreedBluetooth passcode of the device (up to 16 characters) to pair the device toyour device. You must only give this passcode when you connect to the devicefor the first time. Your device connects to the other device, and you can startdata transfer.• My phone's name — to set the device name for Bluetooth connectionsIf you are concerned about security, turn off the Bluetooth function, or set Myphone's visibility to Hidden. Always accept only Bluetooth communicationfrom others whom you trust.Packet dataGeneral packet radio service (GPRS) is a network service that allows mobiledevices to send and receive data over an internet protocol (IP)-based network.To define how to use the service, select Menu > Settings > Connectivity >Packet data > Packet data conn. and from the following options:• When needed — to set the packet data connection to established when anapplication needs it. The connection will be closed when the application isterminated.• Always online — to set the device to automatically connect to a packet datanetwork when you switch the device on.You can connect the device using Bluetooth wireless technology or USB datacable connection to a compatible PC and use the device as a modem to enableGPRS connectivity from the PC.To define the settings for connections from your PC, select Menu > Settings >Connectivity > Packet data > Packet data settings > Active access point,and activate the access point you want to use. Select Edit active access pt. >Alias for access point, enter a name to change the access point settings, andselect OK. Select Packet data acc. pt., enter the access point name (APN) toestablish a connection to a network, and select OK.S e t t i n g s50
