C o n t a c t s513. Select SAVE.To create a new contact, enter a phone number for the newcontact in the standby mode. To save the new number to yourcontact list, select Save > Create New > Mobile 1, Mobile 2,Home, Work, or Fax entry. Enter a name for the new contactand any additional contact information, and select SAVE. Ifno name is entered, the default phone number or address isdisplayed in the contact list.Change the default numberThe default number is the contact number that is called whenyou dial by contact name. To change the default numberwhen multiple numbers are assigned to a single contact,do the following:1. Select Contacts, the contact you wish to modify, and Edit.2. Highlight the Mobile 1, Mobile 2, Home, Work, or Faxnumber you wish to set as the default number, and selectOptions > Set As Default > OK > Yes > OK.Set up phone numbers with pausesPause codes instruct the receiving system to pause or waitbefore entering the numbers that follow them in thedialing string.To add a pause code to a new phone number, do the following:1. Enter the number and select Options and one of thefollowing options:2-Sec Pause—to dial the contact number, pause for 2seconds, and dial a secondary number or extension. "P"appears in the dialing string. You can enter as many pausesas you need to accommodate the timing on automatedanswering services.