13[ 146 ]5 When you’re finished timing, press Stop, then press Options.6 Save appears highlighted.If you want to save the time, see “Save the time” on page 147.7 Scroll up to Start and press Select to continue,ORScroll down to Reset and press Select to set the stopwatch to 0.Measure lap timeYou can use the lap time function when you want to track how long ittakes to complete each cycle or lap.1 Press Menu 7-5 (Extras > Stopwatch).2 Scroll to Lap timing, then press Select.3 Press Start.The running time appears on the display.4 Press Lap to take a lap time.The clock stops, then starts immediately from zero and the lap timeappears below the running time.If you take more than one lap time, the new measured time appears at thetop of the list.Press or to see up to 20 previous measured times.5 When you’re finished timing, press Stop, then press Options.6 Save appears highlighted.If you want to save the time, see “Save the time” below.7 Scroll up to Start and press Select to continue.ORScroll down to Reset and press Select to set the stopwatch to 0.
