Nokia 6620 User Guide 57 Copyright © 2004 NokiaMessaging• MESSAGING SETTINGSMessaging settings have been divided into groups according to the differentmessage types. Scroll to the settings you want to edit and press the joystick.Text messagesSelect Messaging > Options > Settings > Text message to open the following listof settings:Message centers—Lists all the message centers that have been defined.Msg. center in use (message center in use)—Defines which message center is usedfor delivering text messages and smart messages such as picture messages.Options when editing message center settings are Edit, New msg. center, Delete,Help, and Exit.Receive report (delivery report)—When this network service is set to Yes, the statusof the sent message (Pending, Failed, or Delivered) is shown in the reports.Message validity—If the recipient of a message cannot be reached within thevalidity period, the message is removed from the message service center. Note thatthe network must support this feature. Maximum time is the maximum amountof time allowed by the network.Message sent as—The options are Text, Fax, Paging, and E-mail. For furtherinformation, contact your network operator. Change this option only if you are surethat your message center is able to convert text messages into these other formats.Preferred connection—You can send text messages over the normal GSM networkor by GPRS, if supported by the network.Reply via same ctr. (network service)—By setting this option to Yes, if the recipientreplies to your message, the return message is sent using the same message servicecenter number. Note that this may not work between all operators.Multimedia messagesSelect Messaging > Options > Settings > Multimedia message to open thefollowing list of settings:Access point in use—Select which access point is used as the preferred connectionfor the multimedia message center. See "Settings needed for multimediamessaging" on page 51.If you receive multimedia message settings in a smart message and save them,the received settings are automatically used for the access point. See "Smartmessages" on page 52.
