Nokia 6800 User Manual

Also see for 6800: Guide d'utilisation User guide User guide User guide User guide

Contents

Nokia 6800 User Manual Manual pdf 95 page image

88 Copyright © Nokia 2003LAP TIMINGPress Menu, then select Extras, Stopwatch, and Lap timing. Press Start to starttiming and Lap to record a lap time. Press Stop to stop the lap timing. Press Optionsand you can save the lap times, reset the lap times, or start timing again. Refer to“Timing and Split timing”.VIEWING AND DELETING TIMESPress Menu, then select Extras and Stopwatch.If the stopwatch is not reset, you can select Show last time to view the mostrecent measured time. Select View times and a list of names or final times of thetime sets is shown. Select the time set you want to view.To delete the saved times, select Delete times. Select Delete all and press OK, orselect One by one, scroll to the times you want to delete, press Delete and press OK.• CONNECTIVITY (MENU 12)InfraredYou can set up the phone to receive data through its infrared (IR) port. To use anIR connection, the device with which you want to establish a connection must beIrDA compliant. You can send or receive data such as business cards and calendarnotes to or from a compatible phone or data device (for example, a computer) usingthe IR port of your phone.Do not point the IR beam at anyone's eye or allow it to interfere with other IRdevices. This device is a Class 1 laser product.Note: Your phone must be switched on to use this function. Do not switchthe phone on when wireless phone use is prohibited or when it may causeinterference or danger.SENDING AND RECEIVING DATA VIA IR• Ensure that the IR ports of the sending and receiving devices are pointing ateach other and that there are no obstructions between the devices. The preferabledistance between the two devices in an IR connection is no more than 2 ft.7in. (about 80cm).• To activate the IR port of your phone to receive data using IR, press Menu andselect Connectivity and Infrared.• The user of the sending phone selects the desired IR function to start data transfer.If data transfer is not started within two minutes after the activation of the IR port,the connection is cancelled and has to be started again.