30 ©2000 Nokia Mobile Phones. All rights reserved.4 Roll to the setting you want to customise (for example, Ring-ing tone) and press Navi Roller. See “Profile settings”.5 Roll to the desired option and press OK.Profile settingsOnce you have selected the setting Personalise, you can cus-tomise the following settings of the selected profile:• Incoming call alert to define how the phone notifies youof an incoming voice call.The options are: Ringing, Ascend-ing, Ring once, Beep Once and Off.When Incoming call alert is set to Off or Beep Onceno ringing tone will be heard and is displayed when the phoneis in the standby mode.• Ringing tone to set the ringing tone type for voice calls.Tip: If you receive a ringing tone via IR or as an Over-The-Air message (OTA), you can store five personal ringingtones in the ringing tone list. For more information, con-tact your local service provider.• Ringing volume to set the volume level for the ringing andmessage alert tones.• Vibrating alert to set the phone to vibrate at an incomingvoice call and at an incoming text message. The vibrating alertdoes not work when the phone is connected to a charger or to adesktop stand.• Message alert tone to set the ringing tone type for textmessages.• Keypad tones to set the volume level for key pad tones or toset the key pad tones off.• Warning and game tones to set the warning and gametones on or off. For example, when set to on, the phone soundsa warning tone when the battery is running out of power.
