W e b69To receive the service settings as a configuration message, see Configurationsettings service on page 8 and Configuration settings on page 55.For more information and for the appropriate settings, contact your service provider.Activate the settingsMake sure that the Web settings of the service you want to use are activated.1. Select Menu > Web > Settings > Configuration settings.2. Select Configuration and the configuration set you want to activate.Connect to a serviceThere are several ways to connect to the service.• To open the service’s home page, select Menu > Web > Home.• To select a bookmark, select Menu > Web > Bookmarks and a bookmark fromthe list. If the bookmark does not work with the current active servicesettings, activate another set of service settings, and try again.• To select the last viewed web site, select Menu > Web > Last web address.• To enter the address of the service, select Menu > Web > Last web address,enter the address of the service, and select Options > Accept.Disconnect from a serviceTo quit browsing and to end the connection, select Options > Quit; or press theEnd key twice or press and hold the End key.■ BrowseIt should not be necessary to manually configure the browser on your phone.Normally this is done by your service provider once you have subscribed to thefeature. Contact your service provider if you have problems using the browser.After you have made a connection to the service, you can start browsing its pages.The function of the phone keys may vary in different services. Follow the textguides on the phone display. For more information, contact your service provider.If GPRS is selected as the data bearer, the icon is shown on the top left of thedisplay during browsing. If you receive a call or a text message, or make a callduring a GPRS connection, the icon is shown on the top right of the displayto indicate that the GPRS connection is suspended (on hold). After a call, forexample, the phone tries to reconnect the GPRS connection.