A-020W-A unit data sheet287368 ISAM CPE A-020W-A Product Guide3FE-47511-AAAA-TCZZA Issue: 01Figure 5 A-020W-A physical connectionsTable 7 describes the physical connections for A-020W-A CPE devices.Table 7 A-020W-A physical connections5.5 A-020W-A LEDsFigure 6 shows the A-020W-A CPE LEDs.Connection DescriptionOn/Off button This button powers the unit on or off.LAN 1/LAN 2 This connection is provided through Ethernet RJ-45 connectors. Up to two10/100/1000 Base-T Ethernet interfaces are supported.The Ethernet ports cansupport both data and in-band video services on both interfaces.WAN port This connection is provided through an RJ-45 Gigabit Ethernet interface. One10/100/1000 Base-T Ethernet interface is supported.WPS ON/Off button This button is used to start the WiFi Protected Setup (WPS) of new WiFi devices.Reset button Pressing the Reset button for less than 10 seconds reboots the device; pressingthe Reset button for 10 seconds resets the device to the factory defaults.Power input This connection is provided through the power connector. A power cable fitted witha barrel connector is used to make the connection.ON/OFFWANLAN 2LAN 128230
