Configure a A-020W-A807368 ISAM CPE A-020W-A Product Guide3FE-47511-AAAA-TCZZA Issue: 01Procedure 28 DMZ and ALG configuration1 Select Security > DMZ and ALG from the top-level menu in the Ethernet Gateway window,as shown in Figure 33.Figure 33 DMZ and ALG windowTable 31 describes the fields in the DMZ and ALG window.Table 31 DMZ and ALG parameters2 Configure ALG.3 Click Save ALG.4 Configure DMZ.Field DescriptionALG Config Select the check boxes to enable the protocols to be supported by the ALG: FTP,TFTP, SIP, H323, RTSP, L2TP, IPSEC, PPTPDMZ ConfigWAN Connection List Choose a WAN connection from the drop-down menuEnable DMZ Select this check box to enable DMZ on the chosen WAN connectionDMZ IP Address Choose Customer Setting and enter the DMZ IP address or choose the IP addressof a connected device from the drop-down menu
