Telephone41Call barring and call diverting cannot be active at the sametime. When calls are barred, calls still may be possible tocertain official emergency number programmed into yourdevice.Voice mailbox settingsFor information on calling a voice mailbox (networkservice), see “Calling” on page 37.1 Press , and select Tools > Settings > Voice mailbox....2 Define the voice mailbox number, and if you wish to doso, the DTMF tone (voice mailbox password):Number: - Write the voice mailbox number obtainedfrom your service provider.DTMF: - Define DTMF tones for a voice mailbox. Formore information on DTMF tones, see “Sending DTMFtones” on page 42.If your SIM card supports the alternate line service, youcan define the voice mailbox settings for both lines.Other settingsPress , and select Tools > Settings > Other settings....Define the following:Call pageCall waiting: (network service)- If you have activated thecall waiting service, the network will notify you of a newincoming call while you have a call in progress. The optionCheck status checks whether call waiting is activated ornot.Send my caller ID: (network service) - Determines whetheryour number is hidden or presented to the person you arecalling. The value may be set by your network operator orservice provider when you make a subscription (Set bynetwork).Summary after call: - If you select the option On, theapproximate duration of a call will be displayed after thecall.Automatic redial: - If you select the option On, and you calla number that is busy or does not answer, the deviceattempts to call the number automatically. The maximumnumber of attempts is 10.Reject with message: - If you select the option On, a textbox opens, where you can write a message that you canto send to a caller as a reply, whenever you mute anincoming phone call. To modify the message afterwards,select the option Edit message.Line in use: (network service)- If your SIM card supports thealternate line service, select the line you want to use.Block line change: (network service) - If your SIM cardsupports the alternate line service, and you select thisoption, you cannot change the line in use. If you want tochange this setting, you must enter your PIN2 code.ReMX_UG.book Page 41 Tuesday, March 1, 2005 11:15 AM
