Visual Radio89Listening to radioNote that the quality of the radio broadcast depends onthe coverage of the radio station.To switch the radio on or off, connect a compatibleheadset to the smartphone and tap in Visual Radio.Tip: You can also control the radio from the menu.Press , select Radio and an appropriate menucommand.To listen to the radio through the headset orloudspeaker, make sure that the headset is connectedto the smartphone, press , and select Tools >Speaker in use > Headset or Loudspeaker. The lead of theheadset functions as the radio antenna, so let it hangfreely.To adjust the volume, tap and drag , or pressand .To tune radio channels manually, tap or .To search for channels automatically, tap or. Searching stops when a channel is found.To view available channels based on location, press, and select Tools > Channel directory.... Select alocation and radio station. Visual Radio tunes to thatstation automatically. To save the channel to a list ofpreset channels, tap Save. See “Preset channels” onpage 89 for details. To view station details, such as thevisual service ID, tap Details.To switch to stereo or mono output mode, pressand select Tools > Sound > Stereo or Mono.Viewing contentTo view available visual content, select the presetchannel, and tap . To stop viewing visual content,tap . Note that you must have the correct visualservice ID defined and have Visual Radio serviceenabled. See “Preset channels” below for details.Preset channelsYou can save up to 20 radio channels to Visual Radio.To save a channel, tap and to tune in to astation. Press , and select Channel > Save.... Selecta channel slot and write a name for the preset channel.Change the frequency, if necessary. If the stationprovides visual content, add the Visual Radio serviceID, and select the Enable visual service: check box toallow for visual content.Tip: To find the visual service ID of a channel, press, and select Tools > Channel directory.... Select theradio station, and tap Details.To listen to a preset channel, tap on a channel in thelist view.To edit a preset channel, press , and selectChannel > Edit....ReMX_UG.book Page 89 Tuesday, March 1, 2005 11:15 AM
