GB 5To switch the DMP in and out of standby mode.TV To switch between TV or Radio (in viewing mode).To turn the sound off/on (mute).- + To adjust the volume of digital programmes.The DMP’s maximum level is controlled by the TV’s presentvolume setting.0 - 9 To change channel and to select individual menu options.Note: If 0 is entered as the first digit, the Freeze (on/off) func-tionality is activated .Info. To display short and extended information (if transmit-ted) about current and next programmes.BACK To go back one level in the menus normally without storingsettings.EXIT To return to viewing mode from a menu without storingsettings (in menu mode).MENU To display or exit from the ”Main Menu” screen.GUIDE To obtain a list of present and following programmes for theavailable channels. This information is only shown if yourService Provider transmits programme information (EPGinformation).P+ P- To change channels up and down by one unit.To change page in a menu/list/text if more than one page isavailable. To browse through teletext history. To move up/down in the menus and to change channels.To change settings in menus.OK To confirm choices and selection of a highlighted item.To display the TV/Radio channel list.(Red) At the moment, no function.OPTION (Green) To select service options in viewing mode e.g. Al-ternative Audio DVB Subtitling etc. At the moment, no func-tion.(Blue) To toggle between present and previous TV/Radiochannels.TEXT To enter and exit the application Teletext. At the moment,no function.This section describes how to operate the DMP using the buttons on the remote control.Some of the functions can also be carried out using the buttons on the front panel.REMOTE CONTROL