Nokia 8830 S Owner's Manual
                                 | |
Contents
| 
GB 9Connecting to the TV• Connect the Audio/Video cable between the TV andthe AUDIO/VIDEO L R sockets on the DMP.• Connect an RF cable (not included) from the TVAERIAL input socket on the TV to the TV/VCR out-put of the DMP.• Connect the TV aerial directly to the TV AERIAL in-put socket on the DMP.There are many different types of TV/VCR and other equipmentthat you can connect to the DMP.In this manual you will see some of the most common ways toconnect your equipment.If you use RF leads you will have to tune your TV and VCR to theDMP output channel (see page 11).If you have problems with your connections and need help, con-tact your dealer or Service Provider.Connecting the DMPRFAudioConnecting a TV and VCRRefer to your VCR’s manual for full instructions.If your TV has a Audio/Video socket, but yourVCR does not• Connect the Audio/Video cable between the TV andthe VIDEO/AUDIO L R sockets on the DMP.• Connect an RF cable from the RF output on theVCR to the TV aerial input socket on the TV.• Connect an RF cable from the RF input socket onthe VCR to the TV/VCR output socket on the DMP.• Connect the TV aerial directly to the TV AERIAL in-put socket on the DMP.DMPAudioVideoRFIf your VCR has a Audio/Video socket, but yourTV does not• Connect the Audio/Video cable between the VCR andthe VIDEO/AUDIO L R sockets on the DMP• Connect an RF cable from the RF output socket on theVCR to the TV aerial input socket on the TV.• Connect an RF cable from the RF input socket onthe VCR to the TV/VCR output socket on the DMP.• Connect the TV aerial directly to the TV AERIAL in-put socket on the DMP. DMPAudioRFRFInOutVideoInOutInOutVCRRFVCRVideo |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine