|
AT Command Set for Nokia 8850 22Copyright © 2000. Nokia Mobile Phones. All rights reserved.display events, which are not caused by+CDIS shall be indicated by the TA to theTE. Character set used in is asspecified by command Select TECharacter Set +CSCS2 display event reporting using result code+CDEV: ,. All display eventsshall be directed from TA to TE. Characterset used in is as specified bycommand Select TE Character Set+CSCS:0 no indicator event reporting1 indicator event reporting using result code+CIEV: ,. indicates theindicator order number (as specified for+CIND) and is the new value ofindicator. Only those indicator events,which are not caused by +CIND shall beindicated by the TA to the TE2 indicator event reporting using result code+CIEV: ,. All indicator eventsshall be directed from TA to TE+CMGC Send CommandText/PDU entering as specified in 07.05. If SMSC address is not set/restored duringthe current session (i.e. +CSCA? returns +CSCA: "",129) it must be automaticallyread from SIM/ME (location 1). In PDU mode, all kind of GSM 03.40 MO TPDUs canbe sent with this command (operation equals to +CMGS). (GSM 07.05 section 3.5.5.)Syntax:text mode (+CMGF=1):AT+CMGC=,,,,, text is entered Response is (+CMGF=1) and sending ok:+CMGC: [,]Default option is text mode[2,0,0,0,"",129/145]PDU mode (+CMGF=0):AT+CMGC=PDU is given Response is (+CMGF=0) and sending ok:+CMGC: [,]AT+CMGC=? Shows whether command has beenimplemented.+CMGD Delete MessageExecution command deletes message from preferred message storage location . If deleting fails, final result code +CMS ERROR: is returned.(GSM 07.05 section 3.5.4.)Syntax:AT+CMGD=AT+CMGD=? Shows whether command has beenimplemented.+CMGF Message FormatThis command tells the TA, which input and output format of messages to use. indicates the format of messages used with send, list, read and writecommands and unsolicited result codes resulting from received messages. Mode canbe either PDU mode (entire TP data units used) or text mode (headers and body ofthe messages given as separate parameters). Text mode uses the value ofparameter specified by command Select TE Character Set +CSCS to informthe character set to be used in the message body in the TA-TE interface. (GSM07.05 section 3.2.3.).
|
