AT Command Set for Nokia 8850 49Copyright © 2000. Nokia Mobile Phones. All rights reserved.L Monitor Speaker LoudnessThis setting is ignored. It is included for compatibility reasons. (V.25ter section6.3.13.)Syntax:ATL[] L[0]...L3M Monitor Speaker ModeThis setting is ignored. It is included for compatibility reasons. (V.25ter section6.3.14.)Syntax:ATM[] M[0]...M2O Return to On-Line Data StateThis command is used when you have made a connection with the remote deviceand have escaped (with the +++ command) to the command mode. Give thecommand to return from the (on-line) command mode to normal on-line operation.(V.25ter section 6.1.2.)Syntax:ATO[] Go to on-line state. Response isCONNECT [].P Select Pulse DiallingThis setting is ignored. It is included for compatibility reasons. (V.25ter section 6.3.3.)Syntax:ATPQ Result Code SuppressionThis command determines whether responses are sent to the DTE or not. Affectsonly result codes, not information responses. (V.25ter section 6.2.5.)Syntax:ATQ[0] Enable sending of responses to DTE. Thisis the default option.ATQ1 Disable sending of responses to DTES0 Automatic AnswerValue indicates number of rings (RING or +CRING result codes) to wait beforeanswering automatically. Value 0 disables auto-answer. (V.25ter section 6.3.8.)Syntax:ATS0= Values for are 0..255 (default 0).ATS0? Query current setting.Response is .S1 Ring CountReturns number of rings (RING or +CRING result codes) counted after last MT callsetup. (De facto.)Syntax:ATS1? Query current setting.Response is . Values for are000..255.S2 Escape Code CharacterThe default character is a plus sign. See also the command +++ Escape at page 10.(De facto.)
