2©2000 Nokia Mobile Phones. All rights reserved.Both of these parts use the same resources and work closely together – theyare not separate devices. For example, the phone uses the names and phonenumbers stored in the Contacts directory of the communicator interface, andthe communicator interface uses the phone for communicating with the“outside world”, for example, when sending or receiving faxes and connectingto the Internet.The communicator interface contains many organiser and communicationsapplications. The large keyboard, command buttons and display make usingthe applications easy. The communicator interface has no power on/offbutton – it switches itself on when you open the cover and switches off whenyou close the cover.The phone is designed for making and answering calls quickly. It looks andoperates like other Nokia wireless phones, except that the earpiece andmicrophone are on the rear of the device. The phone is switched on and off bypressing the button on the cover.About this manualThis chapter explains how the Nokia 9110i Communicator operates. Thefollowing chapter, "Getting started", helps you begin using the Nokia 9110iCommunicator. It explains the start-up procedure and gives informationabout the various aspects of the device, such as the keyboard and the display."Special features" explains special functions, and "Computer connectivity"shows how to connect your communicator to a PC.The rest of this manual deals with the communicator applications and thephone. There is a short glossary of Internet and cellular terms andabbreviations at the back of this manual.If you are switching from the Nokia 9000 Communicator, the Nokia 9000i, orNokia 9110 communicator to the Nokia 9110i Communicator, please, see ”Totransfer data from older communicator models” on page 27.Tip: Press the button on thecommunicator interface keyboard tofind basic information about thecommunicator applications.IMPORTANT! Do not switch on thephone when wireless phone use isprohibited or when it may causeinterference or danger.