118©2000 Nokia Mobile Phones. All rights reserved.Digital camera connectivityThe Digital camera connectivity application enables you to transfer imagesbetween your communicator and a digital still camera or anothercommunicator via the infrared connection.When you start the application, press Image list to open a list of the images inthe Downloaded files folder. However, you can only select image files with theextensions UPF or JPG.To transfer images from another device to the communicatorThe connection to a digital camera or another communicator is alwaysestablished by the receiving communicator.1 Make sure that the infrared port of your communicator faces the infraredport of the other device.2 Open the Digital camera connectivity application and press Image list.3 Press Receive to start transferring the selected UPF images from the otherdevice to your communicator.To transfer images from the communicator to another device1 Open the Digital camera connectivity application and press Image list.2 Select the UPF image(s) you want to transfer.3 Make sure that the infrared port of your communicator faces the infraredport of the other device, and press Send.To rename the selected image, press Rename and write the new name in theinput field. Do not change the extension at the end of the name.To use the Menu buttonWhen you press the Menu button in the Image list, the following optionsbecome available:Open — Opens the image. You can then zoom in and out as well as rotate theimage.Delete — Removes the image.Convert to JPEG — Converts the selected image(s) from UPF to JPEG format.Convert to UPF — Converts the selected image(s) from JPEG to UPF format.Image information — Presents information about the image. You can alsoview the information with the Ctrl-i key combination.Note: The infrared protocol of thedigital camera must be IrTran-P inorder to be compatible with theNokia 9110i Communicator.