To send a service request to your service provider,select Extras > Service command editor, type the servicerequest, and press Send.Internet setupGo to Desk > Tools > Control panel, and selectConnections > Internet setup.To connect to the Internet, you need an Internet accesspoint.For connecting to the Internet over GPRS, the device haspredefined, default Internet access point settings. You cancreate new Internet access points yourself, or you mayreceive your Internet access point settings in a messagefrom your service provider. This might reduce the numberof settings you need to enter yourself, or eliminate theneed altogether.The exact values for the settings are usually provided byyour service provider. Follow the instructions given to youby your service provider very carefully.Tip: You may need to set up several Internetaccess points, depending on the sites you wantto access. For example, browsing the Web mayrequire one setup, and accessing your companyintranet may require another connection.pressed New, press Yes. Select the access point fromthe list, and press OK.3. Define the settings.• Internet settings name — Enter a descriptivename for the connection.• Internet settings type — Select the connectiontype. Depending on which connection you select,only certain settings will be available during thesetup process.• Network ID — Select the network ID according tothe destination network you want to access withthe Internet access point. You can rename, andcreate new network IDs. Using the correct networkID ensures that the data traffic is routed directly tothe desired destination network. Especially VPN(virtual private network) software may restrictdata traffic for a certain destination network.Network ID can be used to filter Internet accesspoints when establishing an Internet connection.• GPRS access point name (for GPRS only) — If youare not using a default Internet access point, definea name for the access point. You can obtain thename from your network operator or serviceprovider.• Telephone number (for GSM data only) — Type themodem telephone number of the Internet accesspoint.• Password prompt — Change this to Yes if you mustControl panel/C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml Page 89 Sep 27, 2005 12:15:2/C:/USERS/MODEServer/zmao/3934007/ra-8_minime/en/issue_1/ra-8_minime_en_1.xml Page 89 Sep 27, 2005 12:15:2