Nokia C5-00 User Manual

Also see for C5-00: User guide Service manual User guide User guide User guide

Contents

Nokia C5-00 User Manual Manual pdf 46 page image

without your knowledge. No separateacceptance or authorisation is needed.Use this status only for your own devices,such as your compatible headset orcomputer, or devices that belong tosomeone you trust. If you want to acceptconnection requests from the other deviceseparately every time, select Set asunauthorised.To use a Bluetooth audio accessory, suchas a Bluetooth handsfree or headset, youneed to pair your device with theaccessory. For the passcode and furtherinstructions, see the accessory user guide.To connect to the audio accessory, switchon the accessory. Some audio accessoriesconnect automatically to your device.Otherwise, open the paired devices tab,and select the accessory and Options >Connect to audio device.Block devicesSelect > Settings > Connectivity >Bluetooth.1 To block a device from establishing aBluetooth connection to your device,open the paired devices tab.2 Select a device you want to block andOptions > Block.To allow the pairing of a device again afterit was blocked, delete it from the blockeddevices list.Open the blocked devices tab, and selectOptions > Delete.If you reject a pairing request fromanother device, you are asked if you wantto block all future connection requestsfrom this device. If you accept the query,the remote device is added to the list ofblocked devices.Data cableTo avoid damaging the memory card orcorrupting data, do not disconnect theUSB data cable during a data transfer.Transfer data between your device anda PC1 Insert a memory card in your device,and connect the device to acompatible PC using the USB datacable.2 When the device asks which mode touse, select Mass storage. In thismode, you can see your device as aremovable hard drive in the PC.3 Transfer the desired data between thePC and your device.4 End the connection from the PC (forexample, from an Unplug or EjectHardware wizard in Windows) toavoid damaging the memory card.To modify the USB mode settings, select> Settings > Connectivity > USB.To change the USB mode you normally usewith the data cable, select USBconnection mode.To set the device to ask which mode to useeach time you connect the USB data cableto the device, select Ask onconnection > Yes.To use Nokia PC Suite with your device,install Nokia PC Suite on your PC, connectthe USB data cable, and select PC Suite.46 Connectivity© 2010 Nokia. All rights reserved.