3 When Remove memory card and press 'OK' is displayed, remove the back coverof the device, and push the card in, until you hear a click.4 Pull out the memory card, and replace the back cover. If the device is switchedon, select OK.Charge the batteryYour battery has been partially charged at the factory, but you may need to rechargeit before you can switch on your phone for the first time. If the phone indicates a lowcharge, do the following:Charge from a wall outlet1 Connect the charger to a wall outlet.2 Connect the charger to your phone.3 When the phone indicates a full charge, disconnect the charger from the phone,then from the wall outlet.If the battery has not been used for a long time, to begin charging, you may need toconnect the charger, then unplug and reconnect it.You do not need to charge the battery for a specific length of time, and you can usethe phone while it is charging.If the battery is completely discharged, it may take several minutes before thecharging indicator is displayed or before any calls can be made.Tip: Disconnect the charger from the wall outlet when the charger is not in use. Acharger that is connected to the outlet consumes power even when it is not connectedto the phone.Get started 11
