Change the settings for a route1 In the route planner view, open the Settings tab. To get to the route planner viewfrom the navigation view, select Options > Route points or Route points list.2 Set the transportation mode to Drive or Walk. If you select Walk, one-way streetsare regarded as normal streets, and walkways and routes through, for example,parks and shopping centres, can be used.3 Select the desired option.Select the walking modeOpen the Settings tab, set the transportation mode to Walk, and select Preferredroute > Streets or Straight line. Straight line is useful on off-road terrain as itindicates the walking direction.Use the faster or shorter driving routeOpen the Settings tab, set the transportation mode to Drive, and select Routeselection > Faster route or Shorter route.Use the optimised driving routeOpen the Settings tab, set the transportation mode to Drive, and select Routeselection > Optimised. The optimised driving route combines the advantages of boththe shorter and the faster routes.You can also choose to allow or avoid using, for example, motorways, toll roads, orferries.ConnectivityYour device offers several options to connect to the internet or to another compatibledevice or PC.Data connections and access pointsYour device supports packet data connections (network service), such as GPRS in theGSM network.You can also use a WLAN data connection. Only one connection in one wireless LANcan be active at a time, but several applications can use the same internet accesspoint.To establish a data connection, an access point is required. You can define differentkinds of access points, such as the following:• MMS access point to send and receive multimedia messagesConnectivity 79