Nokia CK-20W - Multimedia Car Kit User And Installation Manual

Also see for CK-20W - Multimedia Car Kit: Installation guidelines

Nokia CK-20W - Multimedia Car Kit User And Installation Manual Manual pdf 24 page image

I n s t a l l a t i o n24• —Connector for a connectivity cable• —Connector for the input device CU-8• —Connector for the GPS receiver• —Stereo audio output for a car radio system• —Connector for the microphone MP-2When you install the hands-free unit, ensure that the cables for themicrophone and loudspeaker reach the places where you intend tomount these parts.Do not mount the hands-free unit inside a metal housing or on a metalsurface because this will impair the Bluetooth connection between thehands-free unit and the Bluetooth device that is connected to the carkit. For an optimal connection, ensure that the distance between thehands-free unit and a metal surface is over 4 mm (0.16 inch).To mount the hands-free unit, use the hook and loop tape pads suppliedwith the car kit in the same way as with the input device (see the figuresin Input device starting from p. 24). Detach the two pads from eachother. Attach the pad with the loops first: peel off the protective sheetfrom the adhesive side, and attach the pad to the desired location in thecar. Ensure that the surface where you attach the pad is dry and freefrom dirt and dust.To attach the pad with the hooks, peel off the protective sheet from theadhesive side, and attach the pad to the underside of thehands-free unit.Press the hands-free unit firmly onto the loop pad, and check that thehands-free unit stays securely in place.Input deviceThe input device should be located so that it is within easy reach of theuser. When installing the parts of the car kit ensure that none of theminterfere with or hinder the steering or braking systems or other controlsor systems used in the operation of the vehicle (for example, airbags).Ensure that the input device cable reaches to the hands-free unit forconnection. The best location to mount the input device is horizontally