Nokia CK-20W - Multimedia Car Kit User And Installation Manual

Also see for CK-20W - Multimedia Car Kit: Installation guidelines

Nokia CK-20W - Multimedia Car Kit User And Installation Manual Manual pdf 25 page image

I n s t a l l a t i o n25on the console between the driver’s and front passenger's seat so thatthe input device keys are toward the front of the vehicle.To mount the input device, use the hook and loop tape pads suppliedwith the car kit. Detach the two pads from each other (1). Attach thepad with the loops first: peel off the protective sheet from the adhesiveside (2), and attach the pad to the desired location in the car. Ensurethat the surface where you attach the pad is dry and free from dirt anddust.Attach the pad with the hooks: peel off the protective sheet from theadhesive side (2), and attach the pad to the underside of the inputdevice (3).Press the input device (4) firmly onto the loop pad, and check that theinput device stays securely in place.LoudspeakerFor good acoustic quality, mount the loudspeaker so that it pointstoward the user. Mount the loudspeaker at least 1 meter (3 feet) awayfrom the microphone to avoid audio feedback.Connect the loudspeaker to the mono output of the car kit. The car kitcan be connected to a compatible car radio system. For details, seeAudio connection p. 21.MicrophoneSelect the mounting location of the microphone carefully to increasethe quality of voice transmission.