Charge the battery1. Connect a compatible charger to a wall outlet.2. Connect the charger to the device. If the battery iscompletely discharged, it may take a while before thecharging indicator starts scrolling.3. When the battery is fully charged, disconnect thecharger from the device, then from the wall outlet.Your battery has been precharged at the factory, but thecharging levels may vary. To reach the full operation time,charge the battery until it has been fully charged accordingto the battery level indicator.Tip: You can use older style Nokia chargers withyour device by attaching the CA-44 adapter to theold charger. The adapter is available as a separateenhancement.Insert the memory cardThe sales package of your device may not include amemory card. Memory cards are available as separateaccessories.1. Open the cover of the memory card slot.2. Insert the memory card in the slot with the contactarea first. Ensure the contact area is facing theconnectors on the device.3. Push the card in until it locks into place.4. Close the cover.Eject the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is being accessed.Removing the card in the middle of an operation maydamage the memory card as well as the device, and datastored on the card may be corrupted.1. Press the power key briefly, and select Removememory card.2. Open the cover of the memory card slot.3. Press the end of the memory card to release it from thememory card slot.4. Close the cover.13 Set up your deviceCyanCyan MagentaMagenta YellowYellow BlackBlackCyanCyan MagentaMagenta YellowYellow BlackBlack
