Nokia E51 User Manual

Also see for E51 - Smartphone 130 MB: User guide Specification sheet User guide User guide Brochure

Contents

Nokia E51 User Manual Manual pdf 29 page image

To change the name of the memory card, select Options >Memory card name.You can protect a memory card with a password to preventunauthorised access. To set a password, select Options >Set password. The password can be up to eight characterslong and is case-sensitive. The password is stored in yourdevice. You do not need to enter it again while you use thememory card in the same device. If you use the memorycard in another device, you are asked for the password.Not all memory cards support password protection.To remove the memory card password, select Options >Remove password. When you remove the password, thedata on the memory card is not protected againstunauthorised use.To open a locked memory card, select Options > Unlockmemory card. Enter the password.Eject the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is being accessed.Removing the card in the middle of an operation maydamage the memory card as well as the device, and datastored on the card may be corrupted.1. Press the power key briefly, and select Removememory card.2. Press the release button and slide off the back cover.3. Press the end of the memory card to release it from thememory card slot.4. Close the back cover.Write textThe input methods provided in the device may varyaccording to different sales markets.Traditional text inputis shown on the top right of the display when youare writing text using traditional text input.and indicate the selected case.indicates that the first letter of the sentence is written inuppercase and all the other letters are automaticallywritten in lowercase. indicates the number mode.To write text with the keypad, press a number key 2-9repeatedly until the desired character appears. There aremore characters available for a number key than areprinted on the key. If the next letter is located on the samekey as the present one, wait until the cursor appears, andenter the letter.To insert a number, press and hold the number key.To switch between the upper and lower case mode andthe number mode, press #.To erase a character, press the backspace key. Press andhold the backspace key to erase more than one character.To access the most common punctuation marks, press the1 key. Press 1 repeatedly to reach the desired punctuationmark.To add special characters, press *. Scroll to the desiredcharacter and press the scroll key. 29