• Driver — Select a driver for the printer.• Bearer — Select a bearer for the printer.• Access point — Select the access point.• Port — Select the port.• Host — Define the host.• User — Enter the user.• Queue — Enter the print queue.• Orientation — Select the orientation.• Paper size — Select the paper size.ClockSelect Menu > Office > Clock.In Clock, you can view your local time and time zoneinformation, set and edit alarms, or modify date and timesettings.Alarm clockOpen the alarm clock tab.To set an alarm, select Options > Set alarm. When analarm is active, is displayed.To switch off the alarm, select Stop, or to stop the alarmfor 5 minutes, select Snooze. If the alarm time is reachedwhile the device is switched off, the device switches itselfon and starts sounding the alarm tone. If you selectStop, the device asks whether you want to activate thedevice for calls. Select No to switch off the device or Yesto make and receive calls. Do not select Yes when wirelessphone use may cause interference or danger.To change the alarm time, select Options > Resetalarm.To remove the alarm, select Options > Remove alarm.World clockOpen the world clock tab to check the time in differentcities.To add a city to the world clock view, select Options >Add city.To change the city that determines the time and date inyour device, select Options > Set as current city. The cityis displayed in the Clock main view, and the time in yourdevice is changed according to the city selected. Check thatthe time is correct and matches your time zone.Clock settingsSelect Options > Settings.To change the time or date, select Time or Date.To change the clock shown in the standby modes, selectClock type > Analogue or Digital.To allow the mobile phone network to update the time,date, and time zone information to your device (networkservice), select Network operator time > Auto-update.To change the alarm tone, select Clock alarm tone.69
