Nokia E51 User Manual

Also see for E51 - Smartphone 130 MB: User guide Specification sheet User guide User guide Brochure

Contents

Nokia E51 User Manual Manual pdf 96 page image

Set up an internet access pointfor packet data (GPRS)1. Select Menu > Tools > Settings > Connection >Access points.2. Select Options > New access point to create a newaccess point, or select an existing access point from thelist and then Options > Duplicate access point to usethe access point as a basis for the new one.3. Define the following settings.• Connection name — Enter a descriptive name forthe connection.• Data bearer — Select Packet data.• Access point name — Enter the name for the accesspoint. The name is usually provided by your serviceprovider.• User name — Enter your user name if required bythe service provider. User names are often case-sensitive and provided by your service provider.• Prompt password — Select Yes to enter yourpassword each time you log into a server or No tosave the password in your device memory andautomate the login.• Password — Enter your password if required by theservice provider. The password is often case-sensitive and provided by the service provider.• Authentication — Select Secure to send yourpassword always encrypted, or Normal to sendyour password encrypted when possible.• Homepage — Enter the web address of the pageyou want to display as the home page when you usethis access point.4. After defining the settings, select Options >Advanced settings to define the advanced settings orBack to save the settings and exit.Advanced internet accesspoint settings for packet data(GPRS)Select Menu > Tools > Settings > Connection >Access points.After setting up a basic internet access point for packetdata (GPRS), select Options > Advanced settings, anddefine the following advanced settings:• Network type — Select IPv4 or IPv6 as the internetprotocol type. The internet protocol defines how datais transferred to and from your device.• Phone IP address — Enter the IP address of yourdevice. Select Automatic to have the network providethe device IP address. This setting is shown only if youselect Network type > IPv4.• DNS address — Select Primary DNS address andSecondary DNS address and enter their IP addresses,if required by your service provider. Otherwise, thename server addresses are provided automatically.• Proxy server address — Enter the address of the proxyserver. Proxy servers are intermediate servers used bysome service providers between a browsing service andits users. These servers may provide additional securityand speed up access to the service.96