• Time format and Time separator — Select whetherto use the 12-hour or 24-hour clock system and withwhich symbol to separate hours and minutes.• Clock type — Define the clock type.• Clock alarm tone — Select the tone for the alarm clock.• Alarm snooze time — Define the snooze time for thealarm clock.• Workdays — Define the days of the week that are workdays for you.• Automatic time update — Update the time, date, andtime zone information automatically (network service).Accessory settingsSelect Menu > Ctrl. panel > Settings and General >Enhancement.To define which profile is activated when you attach anaccessory to your device, select the accessory and Defaultprofile.To set the device to answer phone calls automatically after5 seconds when an accessory is attached, select theaccessory and Automatic answer > On. If the ringingtype is set to Beep once or Silent in the selected profile,automatic answering is disabled.To illuminate the device while it is attached to anaccessory, select Lights > On. This option is only availablefor certain accessories.Turn to silence calls or alarmsWhen you activate the sensors in your device, you cancontrol certain functions by turning the device.Select Menu > Ctrl. panel > Settings and General >Sensor settings.Select from the following:• Sensors — Set the display to rotate automaticallyaccording to the device's orientation.• Turning control — Set the device to silence incomingcalls or snooze alarms when you turn the device facedown. To enable this option, the Sensors option needsto be activated.Security settingsSecurity settingsSelect Menu > Ctrl. panel > Settings and General >Security.Select from the following:• Phone and SIM card — Modify the security settings foryour device and SIM card.• Certificate management — Manage your securitycertificates.• Protected content — Modify your settings for DRM-protected content.• Security module — Manage your security module.Avoid using codes that are similar to emergency numbersto prevent accidental dialling of the emergency number.Codes are shown as asterisks. When you change a code,enter the current code, then the new code twice.Device and SIM card securityTo change the PIN code, select Phone and SIM card >PIN code. The new code must be 4 to 8 digits long. ThePIN code protects your SIM card against unauthorised use132 Settings