Nokia E52 User Manual
Also see for E52: User guideSpecificationsUser guideService manualUser guide
                                                                                                                                                                 | |
Contents
| 
• IPv4 settings — Enter the IP address of your device,the subnet IP address, the default gateway, and the IPaddresses of the primary and secondary DNS servers.Contact your internet service provider for theseaddresses.• IPv6 settings — Define the type of DNS address.• Ad-hoc channel (only for ad hoc networks) — To entera channel number (1-11) manually, select Userdefined.• Proxy server address — Enter the address for theproxy server.• Proxy port number — Enter the proxy port number.Packet data (GPRS) settingsSelect Menu > Ctrl. panel > Settings and Connection >Packet data.Your device supports packet data connections, such asGPRS in the GSM network. When you are using your devicein GSM and UMTS networks, it is possible to have multipledata connections active at the same time; access pointscan share a data connection, and data connections remainactive, for example, during voice calls.To define the packet data settings, select Packet dataconnection and When available to register the device tothe packet data network when you switch the device onin a supported network, or When needed to register thedevice to a packet data network only when an applicationor action attempts to establish a packet data connection.This setting affects all access points for packet dataconnections. To use the device as a packet data modemfor your computer, select Access point, and enter theaccess point name provided by your service provider. Touse a high-speed data connection, select High speedpacket access > Enabled.WLAN settingsSelect Menu > Ctrl. panel > Settings and Connection >Wireless LAN.To have an indicator displayed when there is a wirelessLAN (WLAN) available in your current location, select ShowWLAN availability > Yes.To select the interval for your device to scan for availableWLANs, and to update the indicator, select Scan fornetworks. This setting is not available unless you selectShow WLAN availability > Yes.To set the device to test the internet capability of theselected WLAN automatically, to ask for permission everytime, or to never perform the connectivity test, selectInternet connectivity test > Run automatically, Askevery time, or Never run. If you select Runautomatically or allow the test to be performed when thedevice asks for it, and the connectivity test is performedsuccessfully, the access point is saved to internetdestinations.To check the unique media access control (MAC) addressthat identifies your device, enter *#62209526# in thehome screen. The MAC address is displayed.Advanced WLAN settingsSelect Options > Advanced settings. The advancedWLAN settings are normally defined automatically, andchanging them is not recommended.138 Settings |
Related manuals for Nokia E52
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine