You must have an internet access point defined in thedevice to retrieve assistance data from the Nokia A-GPSservice over a packet data connection. The access point forA-GPS can be defined in positioning settings. A wirelessLAN (WLAN) access point cannot be used for this service.Only a packet data internet access point can be used. Yourdevice asks you to select the internet access point whenGPS is used for the first time.Tips on creating a GPSconnectionCheck the satellite signal status — Select Menu >Applications and GPS data > Options > Satellitestatus.If your device hasfound satellites, abar for each satelliteis shown in thesatellite informationview. The longer thebar, the stronger thesatellite signal.When your device has received enough data from thesatellite signal to calculate your location, the colour of thebar changes.Initially your device must receive signals from at least foursatellites to be able to calculate your location. When theinitial calculation has been made, it may be possible tocontinue calculating your location with three satellites.However, the accuracy is generally better when moresatellites are found.If no satellite signal can be found, consider the following:• If you are indoors, go outdoors to receive a bettersignal.• If you are outdoors, move to a more open space.• If the weather conditions are bad, the signal strengthmay be affected.• Some vehicles have tinted (athermic) windows, whichmay block the satellite signals.• Ensure you do not cover the antenna with your hand.Establishing a GPS connection may take from acouple of seconds to several minutes.Establishing a GPS connection in a vehicle maytake longer.The GPS receiver draws its power from thedevice battery. Using GPS may drain thebattery faster.Position requestsYou may receive a request from a network service toreceive your position information. Service providers mayoffer information about local topics, such as weather ortraffic conditions, based on the location of your device.When you receive a position request, the service that ismaking the request is displayed. Select Accept to allowyour position information to be sent or Reject to deny therequest.LandmarksWith Landmarks, you can save the position information ofspecific locations in your device. You can sort the savedlocations into different categories, such as business, and73 Travelling