do not need a separate SIM card to access SIM card dataand connect to the GSM network.To use the SIM access profile, you need the following:• Compatible car kit device that supports Bluetoothwireless technology• Valid SIM card in your deviceWhen the wireless device is in the remote SIM mode, youcan only use a compatible connected accessory, such as acar kit, to make or receive calls.Your wireless device will not make any calls, except to theemergency numbers programmed into your device, whilein this mode.To make calls, you must first leave the remote SIM mode.If the device has been locked, enter the lock code to unlockit first.For more information about car kit devices andcompatibility with your device, see the Nokia web site andyour car kit user guide.Use the SIM access profile1. Select Menu > Ctrl. panel > Connectivity >Bluetooth and Remote SIM mode > On.2. Activate Bluetooth connectivity in the car kit.3. Use your car kit to start a search for compatible devices.For instructions, see the user guide of your car kit.4. Select your device from the list of compatible devices.5. To pair the devices, enter the Bluetooth passcodeshown on the display of the car kit to your device.Tip: If you have already accessed the SIM card fromthe car kit with the active user profile, the car kitsearches automatically for a device with the SIMcard. If it finds your device, and automaticauthorisation is activated, the car kit automaticallyconnects to the GSM network when you switch onthe car ignition.When you activate the remote SIM access profile, you canuse applications on your device that do not need networkor SIM services.To make connections between your device and the car kitwithout separate acceptance or authorisation, selectMenu > Ctrl. panel > Connectivity > Bluetooth, andopen the paired devices tab. Select the car kit and Set asauthorised, and answer Yes to the confirmation query. Ifthe car kit is set as unauthorised, connection requestsfrom it must be accepted separately every time.To end the remote SIM access connection from your device,select Menu > Ctrl. panel > Connectivity > Bluetoothand Remote SIM mode > Off.Wireless LANAbout WLANYour device can detect and connect to wireless local areanetworks (WLAN). Using a WLAN, you can connect yourdevice to the internet and compatible devices that supportWLAN.To use a WLAN connection, you need the following:• WLAN must be available in your location.• Your device must be connected to the WLAN. SomeWLANs are protected, and you need an access key fromthe service provider to connect to them.116 Connectivity