Nokia E52 User Manual
Also see for E52: User guideUser guideSpecificationsUser guideService manual
                                                                                                                                | |
Contents
| 
Accessory settingsSelect Menu > Ctrl. panel > Settings and General >Enhancement.To define which profile is activated when you attach anaccessory to your device, select the accessory and Defaultprofile.To set the device to answer phone calls automatically after5 seconds when an accessory is attached, select theaccessory and Automatic answer > On. If the ringingtype is set to Beep once or Silent in the selected profile,automatic answering is disabled.To illuminate the device while it is attached to anaccessory, select Lights > On. This option is only availablefor certain accessories.Turn to silence calls or alarmsWhen you activate the sensors in your device, you cancontrol certain functions by turning the device.Select Menu > Ctrl. panel > Settings and General >Sensor settings.Select from the following:• Sensors — Set the display to rotate automaticallyaccording to the device's orientation.• Turning control — Set the device to silence incomingcalls or snooze alarms when you turn the device facedown. To enable this option, the Sensors option needsto be activated.Security settingsSecurity settingsSelect Menu > Ctrl. panel > Settings and General >Security.Avoid using codes that are similar to emergency numbersto prevent accidental dialling of the emergency number.Codes are shown as asterisks. When you change a code,enter the current code, then the new code twice.Device and SIM card securityTo change the PIN code, select Phone and SIM card >PIN code. The new code must be 4 to 8 digits long. ThePIN code protects your SIM card against unauthorised useand is provided with the SIM card. After three consecutiveincorrect PIN code entries, the code is blocked, and youneed to use the PUK code to unblock it before you can usethe SIM card again.To set the keypad to lock automatically after a definedperiod, select Phone and SIM card > Keypad autolockperiod.To set a time-out after which the device is automaticallylocked and can be used only if the correct lock code isentered, select Phone and SIM card > Phone autolockperiod. Enter a number for the time-out in minutes, orselect None to set off the autolock period. When the deviceis locked, you can still answer incoming calls, and calls maystill be possible to the official emergency numberprogrammed into your device.To set a new lock code, select Phone and SIM card > Lockcode. The preset lock code is 12345. Enter the current codeand then the new code twice. The new code can be 4-255 93 Settings |
Related manuals for Nokia E52
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine