GSM and UMTS networks, selecting Dual modemay cause constant jumping between the twonetworks, which also increases the demand onbattery power.To select the operator, select Operator selection andManual to choose from available networks, orAutomatic to have the device select the networkautomatically.To set the device to indicate when it is used in MicroCellular Network (MCN), select Cell info display >On.Connection settingsSelect Menu > Tools > Settings > Connection.Access pointsSelect Menu > Tools > Settings > Connection >Access points.An internet access point is a collection of settings,which define how the device creates a data connectionto the network. To use e-mail and multimedia servicesor to browse web pages, you must first define accesspoints for these services.Some or all access points may be preset for your deviceby your service provider, and you may not be able tocreate, edit, or remove them.To create a new access point, select Options > Newaccess point or select an existing access point from thelist and then Options > Duplicate access point to usethe access point as a basis for the new one.Packet data (GPRS) settingsSelect Menu > Tools > Settings > Connection >Packet data.Your device supports packet data connections, such asGPRS in the GSM network. When you are using yourdevice in GSM and UMTS networks, it is possible to havemultiple data connections active at the same time;access points can share a data connection, and dataconnections remain active, for example, during voicecalls. See "Connection manager", p. 53.To define the packet data settings, select Packet dataconnection and select When available to register thedevice to the packet data network when you switch thedevice on in a supported network, or When needed toestablish a packet data connection only when anapplication or action requires it. Select Access pointand enter the access point name provided by yourservice provider to use the device as a packet datamodem to your computer.These settings affect all access points for packet dataconnections.WLAN settingsSelect Menu > Tools > Settings > Connection >Wireless LAN.67 SettingsCyanCyan MagentaMagenta YellowYellow BlackBlackCyanCyan MagentaMagenta YellowYellow BlackBlack