About MapsTo connect to the internet automatically when youstart Maps, select Options > Tools > Settings >Internet > Go online at start-up > Yes.To prevent automatic downloading of maps, selectOptions > Tools > Settings > Internet > Goonline at start-up > Never.To set the device to ask your permission beforeconnecting to the internet, select Options > Tools >Settings > Internet > Go online at start-up >Always ask.To be informed when your device registers to anetwork other than your home network, selectOptions > Tools > Settings > Internet >Roaming warning > On (shown only when you areonline). For details and roaming costs, contact yourservice provider.Tip: To avoid data transfer costs, you can alsouse Maps without an internet connection, andbrowse the maps that are saved in your deviceor memory card.Almost all digital cartography is inaccurate andincomplete to some extent. Never rely solely on thecartography that you download for use in this device.Move on a mapThe map coverage varies by country and region.When you open Maps, the capital of the country you arein or the location that was saved from your last sessionis shown. The map of the location is also downloaded,if needed.To zoom in to your GPS position or your last knownlocation, press the function key and 0.When the GPS connection is active, shows yourcurrent location on the map.To move on the map, scroll up, down, left, or right withthe scroll key. The map is oriented towards north bydefault.To zoom in and out on the map, press the function keyand *, or the function key and #.When you browse the map on the display, a new mapis automatically downloaded if you scroll to an areawhich is not covered by maps already downloaded.These maps are free of charge, but downloading mayinvolve the transmission of large amounts of datathrough your service provider's network. For moreinformation on data transmission charges, contactyour service provider. The maps are automaticallysaved in the device memory or on a compatiblememory card (if inserted).Display indicatorsThe GPS indicator on the bottom rightcorner of the display shows the availability andstrength of the satellite signal. One bar is one satellite.When the device tries to find a satellite, the bar isyellow. When the device receives enough data from thesatellite to establish a GPS connection, the bar turnsgreen. The more green bars, the stronger the GPSconnection. 93 Travelling
