• WEP encryption — Select the desired WEPencryption key length.• WEP key format — Select whether you want toenter the WEP key data in ASCII or Hexadecimalformat.• WEP key — Enter the WEP key data.802.1x security settingsSelect 802.1x as the WLAN security mode.802.1x authenticates and authorises devices to accessa wireless network, and prevents access if theauthorisation process fails.Select WLAN security settings and from the following:• WPA/WPA2 — Select EAP (ExtensibleAuthentication Protocol) or Pre-shared key (asecret key used for device identification).• EAP plug-in settings — If you selected WPA/WPA2 > EAP, select which EAP plug-ins defined inyour device to use with the access point.• Pre-shared key — If you selected WPA/WPA2 >Pre-shared key, enter the shared private key thatidentifies your device to the WLAN to which youconnect.WPA security settingsSelect WPA/WPA2 as the WLAN security mode.Select WLAN security settings and from the following:• WPA/WPA2 — Select EAP (ExtensibleAuthentication Protocol) or Pre-shared key (asecret key used for device identification).• EAP plug-in settings — If you select WPA/WPA2 >EAP, select which EAP plug-ins defined in yourdevice to use with the access point.• Pre-shared key — If you select WPA/WPA2 > Pre-shared key, enter the shared private key thatidentifies your device to the WLAN to which youconnect.• WPA2 only mode — To allow both TKIP and AES(Advanced Encryption Standard) encryption, selectOff. To allow AES only, select OnWireless LAN pluginsSelect Menu > Tools > Settings > Connection >Access points.The EAP (extensible authentication protocol) plug-insare used in wireless networks to authenticate wirelessdevices and authentication servers, and the differentEAP plug-ins make possible the use of various EAPmethods (network service).You can view the EAP plug-ins currently installed inyour device (network service).EAP plug-ins1. To define the EAP plug-in settings, select Options >New access point and define an access point thatuses WLAN as a data bearer.2. Select 802.1x or WPA/WPA2 as the security mode.3. Select WLAN security settings > WPA/WPA2 >EAP > EAP plug-in settings.131 Settings
